2sk-6 Industry Water Ring Vacuum Pump

• After-sales Service: Life-Long Service System
• Warranty: 2 Years
• Max.Head: >150m
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SK
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Material: Stainless Steel
• Structure: Single-stage Pump
• Assembly: Liquid Pumps
• Power: Solar Energy
• Start Up: Hand Pump
• Type: Jet Pump
• Application: Submersible Pump, Clarified Water Pump, Sewage Pump, Slurry Pump, Oil Transfer Pump, Chemical Pump
• Industry: Food Pumps
• Media: Air Pump
• Performance: Wear Pump
• Theory: Centrifugal Pump
• Horsepower: 3300(PA)
• Model Number: 2sk
• Place of Origin: Shandong,China
• Pressure: High Pressure
• Voltage: 220-480V
• Customized Support: OEM, ODM, Obm, Software Reengineering
• Power Source: Hydraulic
• Motor: Water Vacuum Pump
• Seal: Packing Seal or Mechanical Seal
• Color: Blue or According to The Guest′s Request
• Speed: 740/Min
• MOQ: 1 Set
• Function: High Flow Rate Air Pump
• Supply Ability: 300 Set/Sets Per Month
• Lead Time (Days): 30 to Be Negotiated
• Transport Package: Simple Packaging
• Specification: 180X133X140 cm
• Trademark: Oneter
• Origin: Shandong China
• HS Code: 8414100090
• Production Capacity: 300 Set/Sets Per Month
• Package Size: 180.00cm * 133.00cm * 30.00cm
• Package Gross Weight: 4000.000kg

Product Description

PRODUCT INTRODUCTION
Application:Biofuel Industry,Food and Beverage Industry, Irrigation and Agriculture, Raw Water Intake, temperature control, Washing and Cleaning, Wastewater Transport and Flood Control, wastewater treatment, Water Distribution, Water Treatment Solutions
 

Overview of 2SK series water ring vacuum pump SK Series two-stage water ring vacuum pump and 2sk-p1 series two-stage water ring vacuum pump atmospheric pump unit are used to pump air and other non corrosive, water-insoluble and solid particles free gases, so as to obtain higher vacuum in closed containers. It is widely used in food, textile, chemical, pharmaceutical and metallurgical industries and electronic fields, such as vacuum evaporation, vacuum concentration, vacuum moisture regain, vacuum impregnation, vacuum drying and vacuum smelting. It has the characteristics of high vacuum degree, high pumping speed in high vacuum area, compact structure and convenient maintenance. 2SK series is used for working conditions with suction pressure lower than -0.08mpa, and 2sk-p1 series is used for working conditions with suction pressure lower than -0.096mpa

Model significance of 2SK series water ring vacuum pump

Model features of 2SK series water ring vacuum pump Water ring vacuum pump is used to pump air and other non corrosive, insoluble in water, no solid particles in order to obtain a higher vacuum in a closed container. It has the characteristics of high vacuum degree, high pumping speed in high vacuum area, compact structure and convenient maintenance.

Application of 2SK series water ring vacuum pump This series of water ring vacuum pumps are widely used in food, textile, chemical, pharmaceutical and metallurgical industries and electronic fields, such as vacuum evaporation, vacuum concentration, vacuum moisture regain, vacuum impregnation, vacuum drying and vacuum smelting.
CHOOSE OUR STRENGTHS
Quality assurance and honest service
 

FAULT ANALYSIS

 

fault	reason	resolvent
Insufficient air extraction	1. The clearance is too large  2. Air leakage at packing  3. High water ring temperature  4. Leakage of pipeline system	1. Adjust the clearance  2. Compress or replace raw materials  3. Increase water supply  4. Tighten flange bolts, replace gasket or weld cracks
The vacuum is reduced	1. Air leakage at flange connection  2. The pipeline has cracks  3. Packing leakage  4. The clearance between impeller and side cover is too large  5. Water ring heating  6. Water shortage  7. Friction heating of parts causes the temperature of water ring to rise	1. Tighten the flange bolts or replace the gasket  2. Welding repair or replacement  3. Compress or replace the packing  4. Replace the gasket or adjust the clearance 5. Reduce the water supply temperature  6. Increase water supply  7. Adjust or re install
Vibration or noise	1. The anchor bolt is loose  2. There are foreign matters in the pump  3. Blade fracture  4. Cavitation	1. Tighten the anchor bolts  2. Stop the pump to check and remove foreign matters  3. Replace impeller  4. Open the suction pipe valve
Bearing heating	1. Insufficient lubricating oil  2. The packing is pressed too tightly  3. No packing seal water or insufficient  4. The bearing, shaft or bearing frame fit too tightly, so that the clearance between the ball and the inner and outer rings is too small, resulting in friction	1. Check the condition of lubricating oil and add oil  2. Loosen the packing gland properly  3. Supply packing sealing water or increase water quantity  4. Adjust the fit of bearing with shaft or bearing frame
Difficult to start	1.Rust in the pump after long-term shutdown 2. The packing pressure is too tight  3. Friction between impeller and pump body	1. Use water or special tools to turn the impeller several times  2. Tighten the packing gland  3. Re install and adjust

Package & Transport

Abou us
ONETER  is one of the leading manufacturer for the Slurry pump & Coupler& Vacuum pump since 2020 year. Refund the money if you are not satified of the quality.
*100% quality guarantee.
*One-stop service for you.
*Factory competitive price.
*Fast delievery time with stocks.
WHY CHOOSE US?!
1.ONETER  only supply competitive advantage products!
2.Full refund or Free replacement in case of bad quality or late delivery!
3.ONETER are focus on service for solution, not only supply screw barrel parts!
4.Quality is our culture, with us your money in safe your business in safe!!!
Working with scen

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral export wooden case . If you have legally registered patent, we can pack the goods in wooden case with your own marks after getting your authorization letters.
Q2. What is your termsof payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay
the balance.
Q3. How about your delivery time?
A: Generally, it will take from 10 dasys to 50 days after receiving your advance payment according to the pump's material. The specific delivery time also depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q6. Do youtest all your goods before delivery?
A: Yes, we have 100% test the pumps before delivery